Skip to main content

Your Emissions in control

VUmc - Quench piping MRI

When an MRI scanner has to make an emergency stop, a process called quenching is activated. In this process a sudden loss of absolute zero temperature is activated in the magnet coils. This will cease the coils to be super conducting and they become resistive instead, thus eliminating the magnetic field.

During this proces helium will escape from the cryogen bath extremely rapidly, and since helium can reach temperatures around -269 °C a special quench pipe ducting system has to be constructed to guide the gasses safely outside.

 

Challenge

  • Make sure the quench pipe system is up to all regulations set by the government
  • Create a ducting system strong enough to absorb the pressure difference of an MRI emergency stop
  • Create a ducting system that can expand significantly

Solution

Designed a system that was both stong enough and flexible enough to handle MRI emergency stops

Facts

Heat Recovery

Customer:

ULC Verwarming B.V.

Location:

Utrecht, the Netherlands

Benefits

  • The hospital of Deventer does not have to worry about the pressure of an emergency stop of their MRI
  • Quench pipe system is up to all regulations set by the government

Solutions:

Quench piping

ARRAY

Hoogeveenenweg 93
2913 LV Nieuwerkerk aan den IJssel

Nederland

This email address is being protected from spambots. You need JavaScript enabled to view it.
+31 (0) 10 765 12 00

 

LINKS

Privacy statement

 

ARRAY

Hoogeveenenweg 93
2913 LV Nieuwerkerk aan den IJssel

Nederland

This email address is being protected from spambots. You need JavaScript enabled to view it.
+31 (0) 10 765 12 00

 

LINKS

Privacy Statement